Updated NetApp Certified Storage Installation Engineer, ONTAP NS0-181 Braindumps – [2018 Dumps]

NetApp NS0-181 Braindumps NS0-181 dumps NS0-181 Exam NS0-181 Exam Dumps NS0-181 Practice Test NS0-181 Questions
Vendor NetApp
Exam Code NS0-181
Full Exam Name NetApp Certified Storage Installation Engineer, ONTAP
Certification Name NetApp Certified Storage Installation Engineer, ONTAP
Technology ONTAP Cloud

Pass NetApp Certified Storage Installation Engineer, ONTAP NS0-181 certification exam with high grades in the very first attempt. Now no worries of wasting your time and money because BrainDumps-VCE has offered the best NS0-181 certification exam dumps material for guaranteed success. The NS0-181 exam dumps material is detailed and involves all the aspects to make the success confirm. The best quality and authenticity of the NS0-181 certification exam dumps is used by more than 70,000 professionals worldwide.

♥ 2018 Valid NS0-181 Braindumps ♥

NS0-181 exam questions, NS0-181 PDF dumps; NS0-181 exam dumps:: NS0-181 Dumps ( Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)

Latest and Most Accurate NetApp NS0-181 Braindumps:

Question: 21

What network information is required to set up any Cisco switches attached to a clustered Data ONTAP system? (Choose two.)

A. All management ports configured for e0d or the service port (wrench icon) are required.
B. VLAN tags for each interface are required.
C. Host names and IP addresses for each of the controllers and configured switches are required.
D. The appropriate number and type of cables and cable connectors for your switches are required.

Answer: C,D

Explanation:
C: You need the following network information for all switch configurations: *Two or more IP subnet addresses for cluster network and management network traffic
. Host names and IP addresses for each of the controllers and all applicable switches
. Management network port assignments for your controller
D: To configure your cluster, you need the appropriate number and type of cables and cable connectors for your switches. Depending on the type of switch you are initially configuring, you need to connect to the switch console port with the included console cable.
Reference: Clustered Switch Setup Guide for Cisco Switches, page 8
https://library.netapp.com/ecm/ecm_download_file/ECMP1115327

Question: 22

Click the exhibit button.

You are installing a FAS2254 and a DS2246 disk shelf at a customer’s site. The controller and disk shelf must be racked in separate rows in the data center due to available space. The customer wants you to use two of the 20-meter copper SAS cables to make connections.
Referring to the exhibit, which statement is correct?

A. You will need to contract sales to obtain a wireless adapter.
B. You will need to contract sales to obtain the 20 meter copper cables.
C. The controller and disk shelf must be closer together if copper cables are to be used.
D. You will need to contact sales to obtain an Ethernet adapter.

Answer: C

Question: 23

What happens to the NTP configuration in clustered Data ONTAP 8.3 when a node joins a cluster?

A. A node that joins a cluster has a separate NTP service.
B. A node that joins a cluster automatically adopts the NTP configuration of the cluster.
C. A node that joins a cluster must be manually configured in the NTP.
D. A node that joins a cluster must reboot before running the NTP service.

Answer: B

Explanation:
A node that joins a cluster automatically adopts the NTP configuration of the cluster.
Reference: How to configure and troubleshoot NTP on clustered Data ONTAP 8.2 and later using CLI
https://kb.netapp.com/support/index?page=content&id=1014787

Question: 24

You are assigned to install five DS2246 with twenty-four 400 GB SSDs per shelf to a single node system.
According the NetApp, which statement is correct?

A. You cannot install five SSD shelves to one System.
B. You need at least two stacks.
C. You need at least three stacks.
D. You can put all shelves in one stack.

Answer: D

Explanation:
Up to 10 shelves are supported per stack for the DS2246, so we one stack is enough as we only have five shelves (DS2246s).
Reference: Making the Move from FC to SAS Storage
http://www.netapp.com/as/communities/tech-ontap/tot-fc-sas-1101-as.aspx

Question: 25

Which three types of interface groups are supported on NetApp storage systems? (Choose three.)

A. single mode
B. HA interconnect
C. IPspaces
D. static multimode
E. dynamic multimode

Answer: A,D,E

Explanation:
You can create three different types of interface groups on your storage system: single-mode, static multimode, and dynamic multimode interface groups.
Reference: Types of interface groups
https://library.netapp.com/ecmdocs/ECMP1196907/html/GUID-EFA72201-E035-41E2-AC53-CD81A472B5ED.html

Question: 26

You have just configured the customer’s first SVM with a LIF IP 10.0.0.10/24. The customer’s DNS IP address is 172.16.0.250 and you are unable to ping it from the NetApp storage system, but you are able to ping the gateway and everything else works.
In this scenario what is the problem?

A. You need to have the DNS server on the same subnet as the LIF IP address.
B. You need to add a static gateway to the LIFs routing group.
C. You need to have the customer check the cable.
D. You need to add an IPspace and domain broadcast to the port.

Answer: D

New Updated NS0-181 Exam Questions NS0-181 PDF dumps NS0-181 practice exam dumps: https://www.dumpsschool.com/NS0-181-exam-dumps.html